The 6 Best Welders For Home Use | Tig, Mig, Arc Reviews 2018
How many times have you needed to fix a broken metal object, and wished you had a welder in your garage, rather than have to depend on someone else to fix it for you. It’s one of those tools that may not get used too often, but can also prove to be very useful.
Table Of Contents
- Best Welders For Home Compared
- Top 6 Best Welder For Home Use In 2018 Reviews
- 1. Pitbull Ultra-Portable 100-Amp Electric Arc Welder
- 2. Goplus MIG 130 Welder Flux Core Wire Automatic Feed Welding Machine w/ Free Mask
- 3. Hobart 500559 Handler 140 MIG Welder
- 4. Pro-Series MMIG125 125 Amp Fluxcore Welder Kit
- 5. EVERLAST PowerARC 140 140amp Lift Start TIG
- 6. Lotos MIG140 140 Amp MIG Wire Welder Flux Core Welder and Aluminum Gas Shielded Welding
- Best Home Welders Buying Guide
- Final Thought
Even if your welding expertise is not great, owning a welder will help you to patch stuff up until it can be fixed by an expert.
Best Welders For Home Compared
Good home welders need not cost the earth, and can prove to be a worthwhile investment in the long run. It could save you time and money, even if only used for a temporary job. Here in this article, I am going to help you choose the best welders for home use to suit your needs, be it to carry out your own car repairs, mend the gate, or even design and construct decorative pieces for the garden.
Top 6 Best Welder For Home Use In 2018 Reviews
1. Pitbull Ultra-Portable 100-Amp Electric Arc Welder
Coming in low on the pricing scale, the Pitbull Ultra Portable 100 Amp Electric Arc Welder is a basic stick welder. It is a single phase, fan cooled unit, which uses ‘filler metal’ welding sticks.
It operates on 110 volts, and it’s current range is 40-100 Amps. It will weld up to ¼ inch mild steel. It is the most basic of all home welders, and is great for home maintenance and small projects.
It weighs in at just 28 lbs. For the money, this is a super little machine. Well built and fit for the job that it claims it can do.
2. Goplus MIG 130 Welder Flux Core Wire Automatic Feed Welding Machine w/ Free Mask
Next on our list of Best Welders for Home Use is the Goplus MIG 130 Welder Flux Core Wire Automatic Feed Welding Machine. It is a gasless, wire feed welding machine, suitable for repairing car bodywork and any other thin sheet steel. It uses automatically fed ‘flux core’ welding wire, without the need for gas.
So it will give you the experience of MIG welding without the expense of gas bottles. It is constructed using a stainless steel body, has a four position adjustable heating control facility, and dual air vents for lower temperature operation.
The unit also features Automatic Thermal Safety Protection. It operates on 110 volts, with an output current of 105 Amps. The unit weighs in at just 35lbs.
This little MIG unit makes it possible for you to obtain a professional finish, without the layout of a professional machine.
3. Hobart 500559 Handler 140 MIG Welder
This is a compact ‘wire feed’ machine, designed to run on 115 volt normal household power. The Handler 140 can operate with or without ‘shield gas’, as it still uses ‘flux cored’ wire for both steel and aluminium. (Different wire for each material).
It has the capability to weld up to ¼’ steel plate, and has such features as a 5-position voltage control selector, Thermal Overload Protection.
An all new industrial cast aluminum drive system to ensure strength and durability, a quick release drive roll system and a massive 140 Amp output current. It comes complete with a dual gauge for conversion to MIG ‘gas’ welding. It weighs in at an impressive 65lbs, and is a formidable machine to have in your workshop or garage.
4. Pro-Series MMIG125 125 Amp Fluxcore Welder Kit
Next in line is the Pro-Series MMIG125 125 Amp Fluxcore Welder Kit. This superb light duty, starter Welder Kit will prove itself useful for all those small to medium repair jobs.
The compact size of this 120 volt welder makes it a lot easier to use than many other MIG Welders of this type. It’s small size makes use in small spaces much easier and safer.
It can weld Carbon Steel, and a host other steels, along with aluminum materials.
It’s incredible versatility makes it a very valuable piece of equipment for almost any job that might arise around your garage or home.
It runs on the standard 120 volts, and has an output current of 85 Amps, has a 2 stage voltage setting and it will weld material up to 3/16 inch, using ‘flux core’ wire. This unit might well cost more than some other MIG welders, but the quality and stability you get with it make it worth the extra.
5. EVERLAST PowerARC 140 140amp Lift Start TIG
Everlast, a major player in the portable welding machine world, now offer this solid entry level welding machine for TIG welding. The EVERLAST PowerARC 140 140amp Lift Start TIG / Stick IGBT Welder.
Although fairly basic as TIG welders go, offers everything you might expect from a machine of it’s type in order to start welding. It has enough power so you don’t need to worry about the jobs you expect it to do, is small enough to use in confined spaces and is simple to set up and use.
It can run off either 110 volt or 240 volt, and can also run off clean power generators. It has an operating current range of 10 - 140 Amps. One downside of this machine is because it runs on DC output, you cannot TIG weld aluminum. You can, however, stick weld it using specialized rods, although they are quite expensive. This machine is aimed at the lower end of the TIG market, but being cheap doesn’t mean you shouldn’t think about buying it.
6. Lotos MIG140 140 Amp MIG Wire Welder Flux Core Welder and Aluminum Gas Shielded Welding
This is probably one of the most versatile welding machines available for the do it yourself welder, as well as for more professional welders.
It features both 2T and 4T switching, fully adjustable wire feed speed control and weld voltage, shown via two digital displays, an output current of 140 Amps, and a running voltage of 110 volts from a standard supply.
It can weld stainless steel and mild steel and aluminum, (using a spool gun not included in the package) and various other metals, up to a thickness of ¼ in.
The MIG140 welder can handle wire spools of both 4” and 8” of the professional type, and also has a Thermal Overload Protection device to protect it. At 54lbs, this is a beast of a machine, with all the power needed to pack a hefty punch.
Best Home Welders Buying Guide
A perfect weld of any type is seriously a thing of beauty, and it’s a skill.
I remember learning to weld when I was a kid. I started on Oxy/Acetylene, a whole different ball game to Arc Welding.
The gas flame would melt and pool the material you were going to join or repair, and you would simply feed a rod into the molten pool, what could be simpler, a piece of cake! Then I was put on to an arc welder, and things changed.
This heavy box, plugged into the power socket, with a noisy humming transformer, producing sparks from a coated rod and sticking metal together, WOW!!
So, how do you choose the right machine for your needs. Well, the right machine is the one that will deal with the type of material you want to weld together or repair, and its size of course.
You also have to consider the power source you have available to run it, and not forgetting how much money you have to spend. Cheap TIG machines are not necessarily no good. A basic stick welder will be most suitable for temporary repairs around the house and garden, and, if you become good at it, will be more than ample for certain car repairs and sheet metal construction work.
But if you want a more professional appearance to you work, or an easier to use system, then you need to start to look beyond the basic humming box.
This article has focussed mainly on entry level machines. All of them will operate in a ‘home’ environment, using the existing power supply, and all of them will perform perfectly good welding processes, once you become proficient in their use.
Before you go out and spend your hard earned cash on a machine, think about what it is going to be used for, and how often. Are you going to buy one to repair the garden gate, do you want to get all artistic and start building steel ornaments for the garden. Are you thinking of buying, or have you already bought a car as a project, which is in need of some welding repair work?
Obviously, there are differences in the machines I have mentioned here, some will lend themselves to basic patchwork repairs, while others will give you the flexibility to be able to work with different material using the same machine. When you do go out and buy this machine, take into account the various consumables that each one will use, and their costs.
If all you want to do is steel patchwork, then you really don’t need a wire fed gas less machine, you need a simple arc welder, with an earth clamp and a rod holder. But, if you want to lay a sexy bead of weld onto a car wing, for instance, then you need something a little more technical.
On a final note, let me say this. When it comes to welding, there is absolutely no substitute for practice. No amount of experience or skill is too much, you simply cannot over learn in the welding game. A good welder can make good and safe welds each and every time, regardless of the equipment he is using, but will always have room for improvement.
When you have decided on and bought your welder with the help of this best welders for home use article, get it home, read the manual, practice on odd scraps, and then attack the project you bought it for. Have fun, and watch out for those sparks!!