Best 110v and 120v MIG Welders Review In 2019 With Buying Guide
There are many of us who like to work with sheet metal but not sure where to start looking for the equipment, going to need such as a good welding machine.
There are many models available on today’s market, but finding the right one for your needs is not easy. In order to help you select the best 120v MIG welder on the market along with the best 110v MIG welders, we have put together this simple guide.
A good welder does not need to be expensive, there are machines out there to suit all pockets, and this guide shows you some of them.
Table Of Contents
- Best 110v & 120v MIG Welders In 2019 - Compared
- 5 Best 120v MIG Welder 2019 - Reviews
- Best 110v MIG Welders In 2019 - Reviews
- Best 120 Volt & 110v MIG Welders - Buying Considerations
- Safety Concerns
- Final Note
Best 110v & 120v MIG Welders In 2019 - Compared
19 x 10.8 x 14 inches
19 x 11 x 13 inches
23 x 11 x 18 inches
18 x 10.3 x 16.8 inches
19 x 11 x 17 inches
5 Best 120v MIG Welder 2019 - Reviews
1. Hobart 140 500559 Handler Wire Welder
Hobart Welding Products has been in the arc welder business over 90 years, designing and manufacturing some of the best industrial quality welding products you will ever find.
It is a compact machine that can be used for both MIG and flux-cored welding. It operates on the standard household power supply, and has a weld current range of 25 - 140 Amps, with thermal overload protection to protect the machine from overheating.
Fine tuning for your welds is achieved with the help of a 5 position tapped voltage controller.
The great range of features includes settings for flux-cored and MIG welding, a heavy duty work clamp, safety regulators and even a spool of wire and spare contact tips. All this goes to strengthen the fact that this is a seriously high quality machine, and fantastic value for your money.
2. Forney Easy Weld 299 125FC Flux Core Welder, 120-Volt, 125-Amp
Next on our list is a machine from Forney Industries, a top name in the welding machine market and one of the longest operating metal working tool manufacturers in the US.
The Forney Easy Weld 299 125FC Flux Core Welder is a solid, dependable, and affordable machine. It will weld materials up to ¼” in thickness, with great precision. The machine’s high output, an admirable 125 Amps, makes it one of the best of it’s type available.
Wire feed is controlled using a ten speed control knob, and along with other features such as thermal overload protection, the ability to use either 2lb DIY wire spools or the larger 10lb commercial spools, Tweco style gun, MIG gun and ground clamp, once again, make this is a well suited machine for the ‘entry level’ welder, and would be a welcome addition to the workshop.
3. Lincoln Electric K2185-1 Handy MIG Welder
Lincoln Electric have been in the business for 120 years, and are one of the forerunners in the arc welding industry, with their first welding machine making an appearance in 1922, and have they made the ideal welder for you!
The Lincoln Electric K2185-1 Handy welder is compact, lightweight and portable and so very user friendly. If you are looking for the best in entry level MIG welders, then this really is a machine to be given the most serious consideration.
It’s four different voltage settings and wire feed adjustment speed, 35 - 88 Amp weld current, gas and gasless ability, fan cooled supply and compact size make it the absolute ideal tool for the home welder.
With this machine, and all of it’s included accessories, you will soon be welding everything in sight. The kit comes complete with weld gun, regulator for gas and hose, a solid wire spool, chipping hammer, contact tips and a spool of self-shielded wire that is flux cored.
4. LONGEVITY Migweld 140 – 140 Amp Mig Welder
Longevity have not been in the welder market anywhere near as long as the other companies mentioned here, but in their short time in business, have established themselves as a formidable force in that market. This next machine from them, the LONGEVITY Migweld 140 - 140 Amp Mig Welder goes to show they do mean business.
This great little 140 Amp MIG welding machine is a product that has already proved itself by the consistent high marks it receives from its users.
The machine can easily handle welding work on soft metal materials up to ⅜”, and it’s spool feeder is capable of handling wire rolls up to 11 lbs. The Migweld 140 uses your standard 110V power outlet and can deliver a spectacular 140 Amps at the weld head.
The 140’s thermal overload protection will kick in and safely shut the machine down in the case of an overload, so the machine is not damaged. The control panel allows the user to see and adjust settings quickly and accurately, and the various knobs and dials allow for the welder to be fine tuned for faster and more accurate welding.
5. ARKSEN MIG-130 Gas-Less Flux Core Wire Welder Welding Machine Automatic Feed
One of these machines is the Arksen MIG 130 Gasless Flux Core Wire MIG Welding Machine. As a starter machine, this is ideal. It is inexpensive, well made and easy to use. It runs from a standard power 120V power supply, delivers an impressive output welding current of between 50 and 120 Amps, and uses gasless flux core wire.
The Arksen 130 features thermal overload protection and wire feed speed control for that perfect continuous weld. The kit comes complete with welding wire, welding mask, a wire brush and chipping hammer, welding torch and tip and the grounding cable.
It is a mid range welder, small in physical size, easy to transport, perfect for those jobs in restricted space and ideally suited to household repairs, vehicle body repair and renovation work and smaller repairs on farm projects.
Best 110v MIG Welders In 2019 - Reviews
1. Lotos MIG140 140 Amp - 110 Welder
The first thing you notice here is the sleek design and the beautiful combo of black and red. But once you go into details, you realize that Lotos MIG140 is a reliable welder that can deliver impressive results. The setup is child’s play, and it won’t take long. The unit is capable of providing up to 140 Amp of heat at 110v, which is admirable.
According to the manufacturer, the welder can handle mild and stainless steel of reasonable thickness. You can weld materials from 18-gauge to 3/16” and be satisfied with the work done.
The machine is also capable of welding aluminum, but you will need a spool gun. Keep in mind that you shouldn’t deal with aluminum thicker than 1/8.”
The model underwent an upgrade in 2014 and received two significant new features. The digital display enables control, while the 2T/4T switch makes long-time work with this welder more comfortable.
2. Super Deal Black Commercial MIG 130 AC Flux Core Welding Machine
This is a flux-core welder, which means you don’t need any shielding gas for its use. It runs on 110v and delivers welding power between 50 and 120 Amp. The duty cycle varies – when amperage is set at 60 it is 35%, but when you run it at 105 Amp it will be 10%.
Super Deal Black Commercial MIG130 uses two different wires. It can handle flux-cored welding wires thickness from 0.030” to 0.035”, as well as carbon steel and steel one from 0.023” to 0.035”.
That makes it ideal for welding steel materials, including both mild and stainless steel. You can control the feed speed, and the product has an automatic protection from overheating. That makes it an ideal long-term investment and the perfect choice for beginners.
The item weighs less than 40 pounds and a classic black design. The assembly instructions are not as clear as we would like, but you should be able to figure things out.
3. Pro-Series MMIG125 125 Amp Welder Kit
Pro-Series MMIG125 can be of great service if you are an occasional welder. It is perfect for DIY enthusiasts that have a workshop, as well as the work around the garage or farm. This is a flux-core welder, which means it doesn’t require any gas for shielding. The assembly of the unit is straightforward, and the product is light. That makes it ideal for moving around.
When it comes to performance, it can deliver maximum 125 Amp of power. If you use it with 80 Amp, it will have a 20% duty cycle.
That means this welder can work for two minutes without stopping, which is impressive. The unit accepts flux-cored wires from .030 to .035 of thickness. It can deal with materials that are anywhere from 18-gauge thin and 3/16” thick.
The unit can handle thicker materials than that, too. We tested it on ¼” steel, and it worked like a charm. On top of that, it can reach tight spaces thanks to its compact design.
Best 120 Volt & 110v MIG Welders - Buying Considerations
As a homeowner, you will most likely have an armory of tools in your garage or workshop, and it should have one of these machines included in it even it is the smallest of machines for repairing the kids toys, or the garden fence or for carrying out any other light repairs that may may arise.
When you go to buy one, remember, you don’t necessarily need the biggest one you can find or afford, what you need is the right one.
Look for these features when making your choice
Multi Amp Settings
It is not necessary to have the highest amount of heat that the machine can make available every time you have to do a job. Different thicknesses of material, and different weld styles need different amounts of heat. Sometimes, a lower heat can produce a more satisfactory weld than a higher heat. So, make sure the machine has a selector for changing the settings.
Protecting the machine
All of the machines mentioned here have Thermal Overload Protection Devices fitted to them. This protects the machine from overloading and burning out, a strong possibility with any electrical tool. If the machine doesn’t have it, then it won’t be protected, and might well cost you time and money in the future.
Any machine you buy should be capable of welding material at least up to ⅛” in thickness. It is quite possible that all you want your welder for is to weld thin sheet material together, and these machines are good at it, but, you still want your machine to be versatile, to be able to do other work should it arise.
If the machine you are looking at cannot cope with this thickness of material, go and look for one that does, and if the one you find does more than that, then great, but don’t settle for one that won’t.
Where are you going to use your new welding machine? Is it going to be permanently plugged in somewhere in your workshop, or are you going to want to, or have to, move it around from time to time?
The machines we have mentioned here so far are compact and portable, or relatively so. They won’t take a trailer to shift them around, and any fit person will be able to lift them with not too much effort. So if you have to work in a tight space, they could easily be moved nearer to it.
We have deliberately avoided speaking about money here, for a number of reasons, but it is obviously something you are going to be taking into consideration when making your choice of machine.
It is said that you get what you pay for, and in many cases that is true, however, it is not always the case, and with the thousands of machines and suppliers available to you, and with a bit of careful research, you will find the machine you need, at a price you can afford. The important thing here is not to settle for less, as this might well end up costing you more in the long run.
They Are Safe for Human Use
The experts agree that 110v voltage is a lot safer for human use than 220 volts. The reason is that the electrical potential of 110v appliances is low. If anything goes wrong, these products won’t electrocute or otherwise damage your body as quickly as 220v.
Suitable for Beginners
In case of MIG welders, the strength of the voltage determines the heat output of the product. Since 110v is a modest voltage, you shouldn’t expect too much power. If you think this is bad, you should think again.
You will get just enough heat thanks to the amperage. On the other hand, you won’t risk having to deal with too much power. That can particularly matter if you are only entering the world of welding. If you are a beginner, you will be more than satisfied with the heat output you can get from 110v MIG welders.
Perfect for Home Projects
There is no doubt that 110v welders can do an excellent job, especially if you are an occasional welder. If you are a DIY person or you have a small workshop where you don’t weld thick materials, they are an ideal choice.
You can weld various materials with these welders, including stainless steel, carbon steel, and even aluminum. The only thing you can’t deal with is materials that are too thick. However, the chances are you won’t need to weld them if you stick to home projects.
Plug It into Any power Outlet
The majority of the households today are equipped with 110v outlets. With these MIG welders, you don’t have to worry whether you have an appropriate socket. Everything will be ready and plugging in the product will be the only thing needed to get it up and running. Just, don't forget to organize your sockets in proper ways.
It does depend on the model you select. However, if you look at things overall, 110v welders are affordable. Their voltage limits the amperage that they can provide.
Since the products don’t have an option to work with extremely high heat, the manufacturers don’t need to make that an option. That is why they can offer a budget-friendly price for their products.
There are hazards that need to be avoided when using MIG welders, or indeed any form of arc welder. These include, but are not limited to: arc radiation, electric shock, welding fumes, noise and heat and not forgetting fire.
Welding machines should not be installed by unqualified persons, if the machine requires more than a simple ‘plug in’ connection. The machine should be regularly inspected for damage to cables and connectors.
If the machine does blow a fuse, there is usually a good reason, find that reason, do not ignore it. When the welder is not in use, make sure it is switched off, or at the very least, the weld guns are in a safe position so as not to be activated accidentally.
Always assume that any piece of weldable material near a machine that has recently been used is hot. This includes the weld head and electrode holder.
Heat Stress is a common problem with welding, any hot environment can cause this, so make sure the work area is well ventilated. This will also help with any gases or fumes that might occur during a welding job.
Welding produces noise, and some MIG welding machines produce more noise than others. The high frequency noise they produce can affect, and possibly damage the hearing, so it is wise to take precautions to prevent this.
You will, no doubt at some point in your life, have seen someone welding without a mask or welding goggles, simply shielding their eyes with the back of their hand please never do this. Arc Eye is one of the most common welding injuries next to burns and shocks.
The heat at which a weld occurs is enough to burn the eyeball, and blind you. And while we are on the subject of personal injury, welding without a shirt is also not recommended, as arc radiation is on the list alongside arc eye and burns.
There is no substitute for experience. Don’t be embarrassed to ask questions of those in the know. The equipment you are considering going out and buying is not a toy, and making the wrong choice could cost you time and money.
This best 110v and 120v MIG welder review will give you most, if not all, that you will need to make an informed choice, but if you are still unsure, then use it as a basis for finding what it is you are looking for. Once you are satisfied you have answered all your own questions, and maybe a few more, go, buy your machine, bring it home, switch it on, and have fun.